| Type: | Fiber Transceiver |
|---|---|
| Wiring Devices: | ODF |
| Certification: | CE, ISO, RoHS, GS |
|
Still deciding? Get samples of US$ 360/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Huawei MCUD1 10GE Uplink Card is MA5608T main control board integrated with 2-port GE and 2-port GE/10GE optical uplink.
Huawei MCUD1 10GE Uplink Card is a mini control unit board. It is the core of the system control and service switching and aggregation. And it can also function as the management and control core of the integrated network management system (NMS). It communicates with service boards about the key management and control information through the master/slave serial port and inband GE/10GE channel. In this manner, the H801MCUD1 board configures, manages, and controls the device, and also implements the simple route protocol functions.
Huawei MCUD GE Control Card is MA5608T main control board integrated with 4-port GE optical uplink.
Huawei MCUD1 10GE Uplink Card is MA5608T main control board integrated with 2-port GE and 2-port GE/10GE optical uplink.
| Items | Description |
| Type | The one-fibre bi-directional optical module |
| Operating Wavelength | Tx: 1577 nm |
| Rx: 1270 nm | |
| Encapsulation Type | XFP |
| Port Rate | Tx: 9.95 Gbit/s |
| Rx: 2.49 Gbit/s | |
| Minimum Output Optical Power | 2 dBm |
| Maximum Output Optical Power | 6 dBm |
| Maximum Receiver Sensitivity | -27.5 dBm |
| Optical Connector Type | SC/UPC |
| Optical Fiber Type | Single-mode |
| Reach | 20 km |
| Overload Optical Power | -7 dBm |
| Extinction Ratio | 8.2 dB |
| Standard ID | Description |
| ITU-T G.987.1 | 10Gigabit-capable Passive Optical Networks (XG-PON) General Requirements |
| ITU-T G.987.2 | 10Gigabit-capable Passive Optical Networks (XG-PON) Physical Media Dependent (PMD) Layer Specification |
| ITU-T G.987.3 | 10Gigabit-capable Passive Optical Networks (XG-PON) Transmission Convergence Layer Specification |
| ITU-T G.988 | 10Gigabit-capable Passive Optical Networks (XG-PON) ONU Management and Control Interface Specification |
Access and Aggregation Integrated
Large aggregation capacity, 3.2T bit/s backplane capacity, 1920G bit/s switch capacity, 512K MAC addresses
High density GE/10GE interfaces for cascading, up to 128*10GE or 768*GE interfaces, no need for additional investment of aggregation switches
High reliability networking support direct connection to the
BRAS, ONU dual-homing to two OLTs for redundancy and hitless software upgrade function
Any Access
High performance IPTV service, more ISP access
H-QoS support 4-level QoS guarantees OLT wholesale Traditional E1 service access, Native TDM or CESoP for traditional
E1 service of enterprise and mobile base station access
E2E high reliability guarantees business customers and mobile backhaul, BFD/LAG/MSTP/RRPP/Smart Link for uplink redundancy and Type B/Type C/Type C dual-homing for fiber protection
E-LAN function for local traffic inter-connection, meet the requirements of enterprise and campus network
Green Design
With the unique GPON chipsets, the maximum power consumption of the 16-port GPON line card is only 50W, 30% less than industry.
With the unique energy-saving bus, the idle service card and idle service port can be powered off.
Smooth Evolution
Smooth evolution from GPON to NGPON with the integrated platform
Smooth evolution from IPv4 to IPv6 with IPv4/IPv6 dual-stack,
support IPv6 MLD
| Board | Panel ports | Internal interfaces | Channel to the standby control board |
| Channel to the GIU board | |||
| H801MCUD | 4 GE ports | 2 GE/10GE ports | Providing one 10GE port for load sharing with the standby H801MCUD board |
| H801MCUD1 | 2 GE ports and 2 GE/10 GE ports | 2 GE/10GE ports | Providing one 10GE port for load sharing with the standby H801MCUD1 board |
| H801MCUE | 4 GE ports | 2 GE/10GE ports | Providing one 10GE port for load sharing with the standby H801MCUE board |
){kind=link}