| Type: | Ont |
|---|---|
| Certification: | ISO, RoHS |
| Condition: | Used |
|
Still deciding? Get samples of US$ 30/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The Used F663NV3A XPON FTTH Modem WIFI Router 1GE 3FE 1TEL WIFI F663 External Antenna GPON ONU ONT
| Product Description | |
| Model Number | F663NN3a |
| Specification | 1GE+3FE+1POT+1USB+WiFi |
| WIFI signal | Single band 2.4GWiFi |
| Wireless gain | 3db |
| USB | USB2.0 |
| LAN | 1*10/100/1000Mbps adaptive Gigabit ports, full/half duplex, RJ45 interface |
| POT | H248/Sip Voice protocol |
| SUPPORT | OMCI,PPPOE,Route,Bridge,WAN IP Access,Muti SSID |
| Firmware | English |
| Dimension/weight | 195mm*145mm*37mm/174g |
| Fiber port | 1 GPON/XPON interface, ingle-fiber, Downstream rate 2.5Gbps, Upstream rate 1.25Gbps |
| Wavelength | Tx 1310nm, Rx 1490nm |
| Fiber interface | SC/UPC/APC Dual mode/Singal mode |
| RX sensitivity | >-28dBm (1490nm) |
| DC power | 12V 1.0A, external AC-DC power adapter |
| Button | Reset,power,WPS,Wireless |
| Operation | Working temperature: -5- +55ºC working humidity:10-90%(non-condensation) |
| Storage | Storage temperature: -30ºC- +60ºC storage humidity: 10-90%(non-condensation) |
| Feature: | |
| 1.Plug-and-play: services can be deployed by one click on the NMS, and on-site configuration is not required. | |
| 2.Remote diagnosis: Remote fault locating is implemented by the loop-line test of POTS ports, call emulation and PPPoE dialup emulati | |
| 3.Link monitoring: E2E link detection is achieved using 802.1ag Ethernet OAM. | |
| 4.High speed forwarding: 900 Mbit/s forwarding in the NAT scenario. | |
| 5.IPv6 Capability: support IPv6/IPv4 dual stack and DS-Lite. |
){kind=link}